SPL Mode
- 2 Sub categories
- 7 Articles
- Published on Apr 15, 2026
The Amplitude Calibration dialog for SPL calibration. Input and phantom power controls only available for Audient's EVO series, Roland's Octa-Capture, and Smaart I-O. To calibrate one or more input channels for sound level (SPL or Leq) ...
- 4 Articles
- Published on Oct 28, 2026
Starting with Smaart v9.6.0, SPL Mode implements a Checksum in order to ensure the integrity of logged data. Visible within the Log Info dialog, you’ll now see a new piece of information, “Checksum”, which will display “Pass” or “Fail” based on whet...
- Published on Oct 28, 2026
A note on the history of weighting curves Based on research done in the 1930s, the A and C curves were intended to approximate the sensitivity of human hearing for pure tones as a function of frequency and sound level. A-weighting represented wh...
- Published on Jun 10, 2026
A Smaart SPL rig consists of the following components: A license of Smaart with the SPL feature set ( Smaart Suite , Smaart SPL ) A computer that meets Smaart’s minimum system requirements . A Measurement Microphone An Audio Inter...
- 5 Articles
- Published on Jul 31, 2026
Often discussed in SPL, frequency weighting curves can help inform more accurate measurements for specific measurement scenarios. In addition to frequency weighting, it is important to consider how signals are looked at in the time Domain . Typ...
- Updated on Oct 19, 2026
- Published on Jul 31, 2026
Located in SPL mode's Control Bar, the Create Report button creates a .pdf report containing a summary of a source’s sound level history graph information. This source can either be an already created log file or a live input that is currently ...
- Published on Oct 28, 2026
SPL FAQ What is SPL? Sound Pressure Level is an objective measure of the pressure fluctuations in air caused by a sound wave. It can help to characterize the level of any source of sound or noise. Why do we measure SPL? There a...