SPL Config

Prev Next
  • Published on Oct 28, 2026
The SPL Config command (keyboard shortcut [Ctrl] + [Shift] + [E]) opens the SPL Config dialog window, where you can configure sound level measurements and display options for the SPL Meters window and SPL History display in Smaart SPL and Smaa...
  • Published on Jul 30, 2026
The Display page of the SPL Config dialog contains display settings for the SPL History and numeric SPL meters. The latter apply both to the in-Tab SPL/ Signal Level meter that appears by default at the top of the control bar in Real-Time and...
  • Published on Jul 30, 2026
Smaart Suite and Smaart SPL come preconfigured with several built-in and predefined sound level measurement types. If a selected input channel is calibrated for sound level measurement, all of the following sound level measurement types are always a...
  • Updated on Jul 30, 2026
  • Published on Jul 30, 2026
Smaart can perform sound level (SPL and Leq) le vel logging on any calibrated input that is selected for use in I-O Config . “Calibrated,” in this context, simply means that the calibration offset ( Cal. Offset ) specified for the input in I-O ...
  • Published on Nov 3, 2026
The “SPL Compensation” tab in the SPL Config dialog allows you “measure” SPL from a virtually calculated point in space where it might not be possible to place a mic during an event, such as the middle of a dance floor or within an audience seatin...