SPL FAQ
What is SPL?
Sound Pressure Level is an objective measure of the pressure fluctuations in air caused by a sound wave. It can help to characterize the level of any source of sound or noise.
Why do we measure SPL?
There are many reasons to measure SPL:
A consistency tool for the mix engineer - “Is this the same level as it was last time? “ Are we giving the audience a consistent experience every night? You can think of it like quality control.
Health & Safety / Sound exposure - Is this sound level safe? Are we exposing people at this concert to dangerous sound levels? Are we in violation of sound exposure regulations or recommendations such as OSHA or NIOSH?
Legal / Nuisance noise. - Are we bothering the neighbors? Are we in violation of local or regional noise ordinances?
Why not just “use your ears?”
SPL is an objective measure of the strength of sound waves in air – whereas human loudness perception is subjective and complex. It’s possible to feel completely comfortable while being exposed to dangerous sound levels, and it’s also possible to feel like it’s “too loud” even when it’s completely safe.
Using an SPL meter allows you to objectively tell if the levels around you are dangerous without relying on the subjective complexities of human hearing perception.
What hardware do I need?
Please see our Selecting Hardware for SPL Measurement article for guidelines.
What is Class Compliance, do I need it?
Class Compliant means that the measurement rig – and all its components – have been individually lab-certified to meet all the requirements of the applicable standards. This doesn’t mean the measurement is any more accurate, but it does mean that the SPL log data collected by the system can rise to a legal standard of evidence. Systems like 10EaZy come pre-calibrated and tested from the factory, and are tamper proof, so you know the measurement data can be trusted.
For most applications, we recommend class 2 compliant hardware unless the law or ordinance you are measuring to requires class 1. For more information on class compliance, see our Class 1 vs. Class 2 SPL Measurement article.
Can’t I just use an inexpensive handheld meter?
Most handheld sound level meters (SLMs) are fine for relative measurements – making sure you’re hitting the same level every night. Just keep the placement consistent and the battery fresh. However, if the number on the screen needs to be meaningful, the odds are against you, and many meters that claim to be within +/- 2 dB accuracy on their packaging are actually not (and they can drift significantly over time). More importantly, most handheld SLM can only measure the SPL Fast and Slow metrics, not the Leq metrics that are important for events.
It is possible to take accurate SPL and Leq measurements with professional-grade handheld instruments. As with all calibrated solutions, they tend to be far more costly than the cheaper handheld sound meter options, and should come with calibration documentation.
Can’t I just use my smartphone/Smaart RTA?
Smartphones can be great for low-level relative measurements, but there are accuracy issues with internal microphones and most built in microphones are overloaded at concert levels. Like handheld meters, smartphones and tablets can exhibit a response that varies quite significantly based on how you hold the device.
This always leads to someone asking about Rational Acoustic’s mobile app - Smaart RTA? There are device limitations that even we cannot get around, but Smaart RTA allows Pro users to use external devices, such as a USB microphone or even channel 1 of an audio interface.
What are SPL metrics and why do they matter?
Various metrics allow us to characterize SPL measurement data in different ways, much like a photographer using different camera lenses to give different views of the same subject. They are all valid, but some metrics are more useful than others, depending on why we are measuring. SPL metrics most commonly specify both frequency weighting and time weighting.
Further Reading
NIOSH – Noise and Hearing Loss Prevention: Guidance and Regulations
NIOSH – Occupational Noise Exposure: Criterion Document
WHO – Hearing Loss Due To Recreational Exposure to Loud Sounds