Analyzing IR Measurements

Prev Next
  • Published on Jul 22, 2026
Reverberation Time (commonly referred to as T60, RT60, T30, T20 or simply T) is the time required for reverberant sound energy in a space to decay by 60 dB from an excited level. It is regarded as an important metric in the acoustics of not only m...
  • Updated on Sep 9, 2026
  • Published on Jul 22, 2026
Early-to-Late Energy Ratios Early-to-late energy ratios are another way of objectively characterizing the reverberant characteristics of a room. They are arguably a better measure than Reverberation Time for any venue where a sound system is an o...
  • Published on Jun 8, 2026
Selecting Histogram as your display type for an IR mode graph plots a chart of all reverberation times or early-to-late energy ratios by either octave or 1/3-octave bands. The type of data the Histogram displays and the resolution are selected ...
  • Published on Jun 8, 2026
The Spectrograph display in Impulse Response mode is essentially the same display as the real-time spectrograph only rotated 90° (with time on the x-axis instead of frequency). This is because the real-time mode spectrograph relates to other fre...
  • Updated on Sep 30, 2026
  • Published on Jul 22, 2026
The All Bands table i n Smaart collects reverberation times and early-to-late energy ratios for all octave and 1/3-octave bands in a single table. Speech intelligibility metrics ( STI, STIPA, and %ALCons ) are displayed here as well. T...
  • Published on Jul 22, 2026
Why Measure STI & STIPA ? In almost all situations where speech is transmitted between a talker and a listener, it is degraded to some degree by the transmission channel. As the speech is degraded, it becomes less intelligible to the listener....