Measurement Settings (Global)

Prev Next
  • Updated on Oct 28, 2026
  • Published on May 15, 2026
Spectrum Measurement Settings Data Window sets the data window function, used to precondition time domain signals before performing an FFT for narrowband spectrum measurements (banded spectrum measurements always use a Hann window). ...
  • Published on May 1, 2026
To view detailed settings for a Transfer Function measurement engine, double-click its control block on the Control Bar or open the Measurement Config panel and either double-click its color tile in the Measurement Configuration table or selec...
  • Published on May 4, 2026
To view detailed settings for a Spectrum measurement, double-click its control block on the Control Bar or open the Measurement Config panel and either double-click its color tile in the Measurement Configuration table or select its name and c...