Note: in Smaart v9, this feature is retained simply as "MTW". This replaces the non-"plus" version of MTW from Smaart v7 and v8.
Introduced in Smaart v8.5.0, MTW+ is a supercharged version of MTW that uses more FFTs across the measured frequency range and reduces gaps in the MTW calculation pipeline that may result in missing rapid transient events. MTW+ uses a Hamming data window, while MTW uses a Hann window. At this time, it is not possible to average MTW+ traces with traces derived from MTW/power-of-2 FFTs. This option is only available for Transfer Function measurements.
MTW+ is available as an FFT choice on a global or per-measurement level, and it supports both 48k and 96k sample rates. The program default is still “MTW”.
To enable globally, go to Options > Transfer Function and change the FFT size under "General Settings" (at the top) to 'MTW+'.
.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A15%3A59Z&se=2026-11-18T17%3A26%3A59Z&sr=b&sp=r&sig=suMw5T56n1ERuZqbmp%2FLn5BuAWvatjtw2eOH9arN9LM%3D)
Setting MTW+ globally.
To set a single TF engine to use MTW+, double-click on the measurement engine to bring up its settings, un-check "Use Global" to the right of FFT, and change the selection to 'MTW+'.
.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A15%3A59Z&se=2026-11-18T17%3A26%3A59Z&sr=b&sp=r&sig=N10ri%2BQcsHnaGHH%2FIJENojnZlr7i0G9opfufnNMeIEI%3D)
Setting MTW+ for a single TF engine.