Smaart Legacy
- 4 Sub categories
- 6 Articles
- Updated on Aug 25, 2026
- Published on Aug 25, 2026
For more information regarding Smaart v9 compatibility, please consult Smaart's system requirements here . Due to a compatibility change in third-party vendor code, versions of Smaart 9.1.6 and higher are no longer compatible with macOS H...
- Published on Aug 20, 2026
Short answer: No While you can save your current settings to a configuration file to be recalled later, this file cannot be reliably transferred between devices or across operating systems. Some of the settings that are saved contain environmen...
- Updated on Aug 20, 2026
- Published on Aug 20, 2026
From Smaart v6 onward, our software has been designed to be dual-platform. Each Smaart license comes with installers for both Windows and macOS. Please refer to the chart below for the oldest and newest operating system (OS) supported by each versio...
- Updated on Aug 20, 2026
- Published on Aug 20, 2026
Note: in Smaart v9, this feature is retained simply as "MTW". This replaces the non-"plus" version of MTW from Smaart v7 and v8. Introduced in Smaart v8.5.0, MTW+ is a supercharged version of MTW that uses more FFTs across the measured frequenc...
- Published on Aug 20, 2026
Yes, BUT: Traces captured within Smaart v7 won't automatically transfer to Smaart v8. The two programs have separate directories and act as independent programs. The main issue, however, is that traces saved in v7 are actually written to tempor...
- Published on Aug 20, 2026
SmaartLive 5.4 and the Analyzer Bridge The Dolby® Lake® Analyzer Bridge was a piece of software that allowed intercommunication between SmaartLive 5.4 and the Dolby Lake Controller. Analyzer traces from Smaart could be plotted in Lake Controller an...
- 1 Sub categories
- 5 Articles
- 7 Articles
- 4 Articles
- 2 Articles