Real Time Mode Plot Legends

Prev Next


Clicking on the name of the front trace in the upper right corner of any real-time graph except the Live IR will open its legend box. The graph legend lists all live measurements that are currently displayed on the graph as well as any captured data traces (if applicable) that are currently visible.

Live measurement traces appear in the legend as round buttons while captured traces are represented by file icons (a page with the corner folded over). One trace is always selected – normally the one at the top of the list – and the current active live measurement is indicated by an outline around it. Each icon in the legend is colored to match the display color of the corresponding data trace on the graph. If any trace has a weighting curve applied to it, a small bullet (•) is appended to the trace name to indicate this. When a trace is displayed with vertical (y-axis) offset, the offset value in decibels is shown to the right of the name. An inverted Transfer Function trace is shown with its name enclosed in curly brackets (e.g., “{Mic 1}”). Clicking anywhere in the Smaart window outside the legend box closes it.

Legend box for a transfer function graph

Clicking on the name of a live or captured trace in the legend box selects the object and moves it to the top of the legend list. This also makes it the top trace in the z-axis stack on the corresponding graph(s). You can multi-select traces in the legend box by holding down the [Ctrl/Cmd] key while clicking their names or by holding down the [Shift] key while clicking to select a contiguous group of objects.

You can hide a trace by clicking its icon in the legend. When you do this, the trace is removed from the graph and an “X” is drawn though its show/hide button on the Control Bar if it is a live measurement, or its icon in the data library pane on the Data Bar if it is a captured data file. Clicking on the icon or show/hide button for a hidden data file or live measurement removes the X and makes the trace visible on applicable graphs.

Below the legend list are three buttons. The Hide button hides a selected trace or group of traces and removes them from the graph. The Reset Y± button, clears all vertical offsets applied to any live or captured data trace. This action can be undone while the legend remains open by clicking the Reset Y± button again, provided that no additional changes have been made to trace offsets in the meantime. When two graphs of the same type are selected, the Move button moves the selected trace from the current graph to the other.

Plot Time Reference (PTR) and Time Offset (TO)

With Plot Time Reference enabled in Advanced Preferences, an additional control will appear in the bottom-left corner of any Phase plot(s) showing a number value (rounded to hundredths) and +/- buttons. The PTR value represents the Phase Plots Time Reference, or in other words, what that traces phase display is based on. The PTR is equal to the Measurement Time Reference of the captured trace, plus or minus any Time Offset applied using the PTR controls (using the +/- buttons). For example, the measurement below has a Measurement Time Reference (MTR) of 15ms, which the PTR text entry field reflects:

When you adjust the PTR value, that amount of delay is reflected as +/- Time Offset (TO) and displayed in the upper right corner of the Phase plot(s). The control and command concept here is meant to be similar to a Y-axis dB offset, the value of which is displayed in the upper-right of the Magnitude plot. The Phase Plot Legend will also display the TO value and has a button to clear TO. Below, the PTR value has been increased by .5ms. As now there is a Time Offset for that measurement, +0.50ms is displayed in the upper right corner of the phase graph. The PTR is now 15.50ms, however the MTR is still 15ms:

A key point here when describing what the phase PTR (Plot Time Reference) value is, is that it is the MTR +/- any Time Offset (TO): PTR = MTR +/- TO