--- title: "Time Weighting & Time Averaging" slug: "time-weighting-time-averaging" updated: 2026-07-31T20:22:23Z published: 2026-07-31T20:22:23Z canonical: "doc360.rationalacoustics.com/time-weighting-time-averaging" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Time Weighting & Time Averaging Often discussed in SPL, [frequency weighting curves](/v1/docs/weighting-curves) can help inform more accurate measurements for specific measurement scenarios. In addition to frequency weighting, it is important to consider how signals are looked at in the time Domain. Typically, noise exposure limits are specified as single numbers. This is useful when measuring steady-state noise sources such as industrial machinery, but live music and other similarly dynamic noise sources require different parameters to measure accurately. Since real-world signals, such as that of a musical program, change in level from moment to moment, our measurements can produce different results depending on the period of time over which they take place. For instance, a transient event such as a drum hit will have a high peak value, but a lower value over time due to the silence in between hits. Longer measurement periods allow the sound engineer at a concert to mix a dynamic show. Sound level measurements in Smaart fall into three different categories of time-domain weighting: Exponential Average, Equivalent Continuous Sound Level (Leq), and Peak (instantaneous level). ## Exponential Average Exponential averaging is the most common category of time-domain weighting, often seen on basic sound level meters. It comes in two varieties: SPL Fast, which uses a Time Constant of 125 milliseconds, and SPL Slow, which uses a time constant of 1 second. Exponential averaging is, in a sense, like applying a low-pass filter to the Signal, but in the time domain. Doing so “dampens” the reading against quick jumps in level, but keeps it trending towards the current level. Although SPL Fast and Slow are the most commonly available (and used), they don’t offer enough context to allow us to make meaningful statements about level trends over time. ## Equivalent Continuous Level A more useful metric for sound level monitoring applications is Equivalent Continuous Sound Level, or Leq. Leq is a time-averaged measurement of total sound energy over a specified time period, presented as a single dB value. Since live events tend to have high Dynamic Range and crest factor, Leq is typically the most useful metric for evaluating level trends between sets, individual songs, or even sections within a song. For this reason, Leq measurements spanning 10 or 15 minutes are the most implemented when setting sound level limits at live events. In Leq readings, the number in the suffix indicates the measurement period in minutes alongside the corresponding frequency weighting letter. For instance, an SPL measurement labeled as LAeq 15 uses an A-weighted frequency curve, averaged over 15 minutes. In Smaart Suite and Smaart SPL, you can configure an unlimited number of Leq measurements with averaging times from 1 second to 24 hours. ## Peak/Instantaneous The “Peak” measurement always shows the maximum instantaneous level reached within a measurement interval. It is useful for evaluating compliance with regulations seeking to protect employees against high level impulses such as those created by industrial machinery, explosives, and firearms. In signal processing, the term “domain” refers to the independent variable of a signal. By convention, when graphing a signal the independent variable is typically placed on the horizontal (x) axis of the plot with the dependent variable on the vertical (y) axis. For example in Smaart, an impulse response display, with time (the independent variable) on the x axis and amplitude (the dependent variable) on the y-axis, is referred to as a time domain display. Similarly, Spectrum and Transfer Function displays where magnitude or phase shift are plotted as a function of frequency are called frequencydomain displays. In physics and engineering the term time constant is most commonly used to denote a time span between reference or threshold points in continuous processes, such as rise or decay time in the step response of filters, heating and cooling times in thermal systems and lag times in mechanical systems. In the context of acoustic measurement we typically use (or perhaps misuse) the term to mean the total time required for discrete processes, such as the time it takes to collect enough samples for an FFT and/or the time span of an impulse response measurement. This is to say that we tend to use the term interchangeably with Time Window. Strictly speaking a signal can be any set of values that depends on some other set of values. In signal processing, the independent variable, e.g., time or frequency, is said to be the domain of the signal. In audio and acoustics, the things we most commonly think of as signals are time domain signals, where voltages or numeric values representing amplitude (the dependent variable) vary over time (the independent variable). But by strict definition, most of the things we see in Smaart could also be called signals, including transfer function Magnitude and Phase and RTA displays where relative energy or phase shift are presented as a function of frequency, rather than time. The difference in level between the highest and lowest signal a system can accept or reproduce, for example the range between the noise floor and the clipping voltage of an amplifier, typically expressed in decibels.