Smaart RT Release Notes

Prev Next

Smaart RT (v9.6.4) – March 30, 2026

• Fixed a bug with the command bar

Smaart RT (v9.6.3) – March 26, 2026

• Improved UNICODE and font support

• Improved support for Audient Evo Gain Tracking on Tahoe

• Improved configuration load time

• Restored @ and # character support when naming trace files

• Fixed a bug with coherence blanking in ASCII exports

• Fixed a bug with signal generator noise generation cycling

• Fixed a bug where measurements would not run with settings dialog open

• Fixed a bug where the squared coherence setting would not effect phase

• Fixed a crash when parsing files

Smaart RT (v9.6.2) – December 17, 2025

• Added fallback font support

• Restored ability to set trace capture color to the exact color of engines

• Updated phase power averaging algorithm

• Fixed a bug where Data Modeler wouldn't open when create DSP from selected was used

• Fixed a bug where Leq buffers were reset when adding a new custom metric

• Fixed a bug where random noise generator cycles

• Fixed a bug when starting an engine that already has delay set on Windows

• Fixed a crash that occurred when data without LIFFT information is shown while LIFFT is the current plot type

Smaart RT (v9.6.1) - Released 17 October 2025

• Added "Exit Config" button to SPL meter bar

• Added "Toggle Data Bar/SPL Meter Bar" to the Data bar hamburger menu

• Updated SPL meter bar to allow removal of up to three meters

• Updated Config menu option to Meter Config in SPL meter bar hamburger menu

• Improved compatibility between Smaart Products

• Improved input meter color displays with 10EaZy

• Fixed a bug with spatial averaging

• Fixed a bug with creating Data Modeler projects from Smaart

• Fixed a bug with "Link Plot Banding"

• Fixed a bug where overwrite caused folders to disappear from the data bar

• Fixed a program hang when the application is closed with the delay tracker running

• Fixed a bug with dual signal generator

• Fixed a crash when adding a new measurement engine while in multi-spectrum view

Smaart RT (v9.6.0) - Released 13 Aug 2025

• Added option to base captured trace color off of engine color, Updated organization of Preferences > General

• Added a calibration prompt when SPL metrics are selected for a non-calibrated input

• Added Spectrum measurement timer

• Added preference for global vs data type session folder creation mechanism

• Added the option to disable measurement engine reordering

• Added Average-Measurement Time Reference

• Added horizontal line when moving dynamic range widgets

• Added Timer Overlay

• Added Y-Offset and Time Offset text entry in plot legend

• Added auto highlight for quick name editing to the Trace Average dialog

• Added double click on dynamic range widgets to type in value

• Added option to remove the date from the clock

• Added Graph Grid Lines preference

• Added copy trace data file

• Added Paste functionality to data right click menus

• Improved Save As behavior

• Improved visibility for in-plot text

• Updated SPL Calibration "set this value to" field to be persistent

• Updated right click menus

• Updated Transfer Function Timer GUI

• Updated Spatial Averaging Algorithm

• Updated name of Capture All Dialog

• Updated SPL Calibration dialog

• Updated Multi-Spectrum View to remove axis labels

• Updated timer fly up behavior to accommodate switching measurement engine type

• Updated SPL calibration progress bar

• Updated timer naming and folder creation mechanism

• Updated text in Advanced Preferences window

• Updated Timer and Capture All to use trace color settings

• Updated Session Folder Naming mechanism, Added option for session folder naming convention

• Fixed a bug where measurement and reference input meters were both green

• Fixed a bug that prevented new Session Folders from using names of folders that no longer exist

• Fixed a bug where files can be unselected in the data bar when open and closing a submenu

• Fixed a bug where multi-selecting and deleting engines in engine config only deletes the last selected engine

• Fixed a bug where switching skins with IO Config open was desynchronizing skin components

• Fixed a bug with Syncsource LIR calculation

• Fixed a bug with renaming traces

• Fixed a bug when canceling the timer

• Fixed a bug with the spectrum timer

• Fixed a bug with spatial averaging

• Fixed a bug with capturing traces in multi spectrum view

• Fixed a bug with recapture while in Multi-Spectrum view

• Fixed a bug where the signal generator contour is changing when on the custom metrics page

Smaart RT (v9.5.2) - Released 30 April 2025

• Fixed a bug where the background window was not dimmed properly when the about window was shown and the main smaart window was windowed

• Fixed a bug where uncalibrated inputs could be set to metrics other than Full Scale

• Fixed a bug where trace names would automatically be accepted after using a modifier key

• Fixed a deadlock when toggling delay tracking

• Fixed a crash caused by importing a blank Target Curve file

Smaart RT (v9.5.1) - Released 13 February 2025

• Removed Offset column for spectrum target curve dialog

• Removed "Triggered by IR" from RT sweep stimulus signal generator dialog

• Updated behavior of friendly names for Audient Evo loopback channels

• Fixed a bug where Automatically Collapse when Clicking Outside would close flyups still in focus if contents were dragged around

• Fixed a bug where syncsource measurements were not behaving properly after re-opening smaart

• Fixed a bug where the signal generator would not start if an output device was selected for use but no channels from the device were selected

Smaart RT (v9.5.0) - Released 24 October 2024

• Added the ability to use band-limiting for signal generator noise contours other than Pink noise

• Added Multi-File Playback

• Added sine wave frequency sliders to signal generator flyout

• Added mono, stereo, and multi generator playback types

• Added SMPTE standard noise type

• Added Red noise contour

• Added Pink/Red noise hybrid contour

• Added inverse pink weighting

• Added transfer function target curve tolerance

• Added support for creating target curves from saved data traces

• Added clock to SPL metrics list

• Added link plot zoom preference

• Added coherence line thickness preference

• Added trace color assignment preference

• Updated Live IR plot label behavior

• Updated scroll bar contrast

• Added the ability to capture hidden measurements when using capture all

• Updated Smaart Loopback behavior when the signal generator is off

• Updated signal generation level of pseudorandom noise.

• Updated Leq MAX field behavior to not populate until buffer has been filled

• Updated "Pink Noise" label to "noise"

• Updated target curve error message language

• Updated the noise GUI

• Removed least significant digit from TF tolerance field

• Launching Smaart a second time now brings the existing program window to the front of the stack in Windows

• Improved behavior when editing fields

• Improved behavior when using the delay finder with SyncSource measurements

• Improved view preset behavior with the live IR plot

• Improved organization of TF Graph Settings

• Improved link plot banding behavior in multi spectrum view

• Fixed a bug where the signal generator did not turn off when switching to file stimulus with no file selected for playback

• Fixed a bug where "Track All" command would not affect hidden measurements

Smaart RT (v9.4.1) - Released 16 August 2024

• Fixed a bug where all traces were using the Foreground Thickness setting

• Fixed a bug where the "Plot instantaneous response" setting was not working

• Fixed a bug where Magnitude and Phase plots were showing different top traces

• Fixed a bug where the "Display Live IR" setting becomes un-enabled when closing Smaart from Spectrum view

• Fixed a bug where Smaart sometimes wouldn't close when installing an update

Smaart RT (v9.4.0) - Released 9 July 2024

• Added support for sending stored measurement traces directly to Smaart Data Modeler

• Added Support for running measurements that use Smaart loopback while the generator is off

• Added Transfer Function Target Curves

• Added ability to reorder Target Curves

• Added multi-trace drag and drop support

• Added Phase Graph Plot Time Reference (PTR) display and Time Offset (TO) Controls

• Added Spectrum averaging depth to Measurement Settings

• Added support for measurement delay times over 1000ms

• Added the ability to change trace color from right click menu

• Added Command/Control + Shift + Y hotkey to clear Time Offset

• Updated Spectrum Target Curve file formatting

• Updated rendering of disabled combo boxes

• Changed "Import" button in "Export to DSP Channel" dialog to say "Export"

• Updated Trace Info language

• Changed "Measurement Delay" to "Measurement Time Reference" in Trace Info

• Updated Coherence View Preset behavior to follow global when "Always use MTW Coherence" is not selected

• Moved "Mag Averaging Type" checkbox to Graph Settings and renamed it to "Mag Averaging Display"

• Moved "Use MTW Coherence" checkbox to Graph Settings instead of Measurement Settings and renamed it "Always display MTW Coherence"

• Fixed a bug where max frequency limits for sine wave and band-limited pseudorandom pink noise did not equal Nyquist frequency for the selected device's sample rate

• Fixed a bug where unselected inputs would not be removed from the amplitude calibration window

• Fixed a crash that could occur in Windows when trying to change the Signal Generator's source to a File while it is playing

• Fixed a bug where Command Y (Reset Y Offset) only clears offset in the focused plot

• Fixed a bug where graphs would get corrupted after changing views

• Fixed a crash when making mismatched Target Curve visible

• Fixed a crash when selecting File as the generator output type

• Fixed a bug where switching views with LIFFT shown would corrupt the plot view

Smaart RT (v9.3.1) - Released 13 May 2024

• Fixed graphical issues that occurred on some Apple Silicon Macs

• Fixed a bug where graphs would get corrupted after changing views

Smaart RT (v9.3.0) - Released 2 May 2024

• New Signal Generator fly-up GUI

• Added Smaart Loopback mechanism replacing old virtual "Generator" device

• Improved Active Output Preset indication

• Improved Client Window measurement assignment workflow

• Added support for multi-channel wave files in the signal generator

• Added Option for files to playback as a Mono Sum

• Added “Do not show me this again” option to the Multi-Device TF signal generator warning

• Peak Hold now works with Live spectrum Averages

• Signal Generator no longer automatically compacts when the window size is small

• Added hotkey to Track All [Shift + D]

• Added hotkey to zero out all measurement delays [Alt/Option + D]

• Added hotkey to reset SPL Leq buffers [Alt/Option + V]

• Added hotkey to trigger the timer macro [Shift + T]

• Added hotkey to toggle between Phase and Group Delay [Shift + M]

• Added hotkey to cycle plot focus [Shift + P]

• Added hotkey to run all engines in current tab [Ctrl/Cmd + A]

• Added hotkey to stop all engines in current tab [Shift + A]

• Added hotkey to increase generator level [Ctrl/Cmd + G]

• Added hotkey to decrease generator level [Shift + G]

• Updated the [Alt/Opt + A] hotkey to close I-O config when already open

• Expanded the click area for closing flyups

• Improved window behavior when using more than one computer monitor

• Fixed an issue where the cursor focus would not remain on the Banding menu

• Fixed a bug where 32k FFT coherence was used as the default

• Fixed a bug where the sine generator would click when changing frequency with the slider

• Fixed a bug that left a "Folder" Artifact in the Data Bar

• Fixed a crash that occurred when duplicated a new tab in TF View

• Fixed a crash that occurred when using SyncSource and changing FFT size while the signal generator was running

• Various performance improvements

Smaart RT (v9.2.2) - Released 26 February 2024

• SPL Meter can now be broken out into a standalone resizable window

• Magnitude Thresholding for the delay finder is now OFF by default and can be enabled via TF Measurement Settings

• Improved graph behavior while the application window is resized

• Improved graph performance when modifying multiple traces at the same time

• More improvements to window behavior when multiple monitors are connected or disconnected

• Fixed a crash that occurred when rapidly switching plot views

• Fixed a bug that made it difficult to click the L-IFFT checkbox in Advanced Preferences

• Fixed a bug where Coherence blanking was using the wrong dataset when Use MTW Coherence was enabled

• Fixed a bug that caused captured spatial average traces to not follow the global averaging type setting

• Fixed a bug where disabling "Link Phase and Mag. Smoothing" reverted both Mag and Phase smoothing to "No Smoothing"

• Fixed a bug where the trace name label in plots did not update after renaming a measurement engine

• Fixed a bug where the trace icon showed the wrong hide-show state when moving a trace out of a folder

• Fixed a bug where Folders in the Data Bar minimized after using Assign Random Color

• Fixed a bug that prevented FFT size changes from applying immediately

Smaart RT (v9.2.1) - Released 16 October 2023

• Fixed a bug that caused an error to appear if Live Averages or Spectrum Measurements were started while Syncsource was enabled

• Fixed a bug that caused the Client Window to forget measurement assignments after it was closed and re-opened

• Fixed a bug that prevented the Spectrograph from scrolling backwards after the slice height was changed

• Fixed a bug where Transfer Function engines would list the wrong reference channel name when using the virtual “Generator” device

• Fixed a bug that caused the Advanced Delay Finder window to render partially off-screen

• Fixed various issues related to “Import ASCII”

Smaart RT (v9.2.0) - Released 6 September 2023

• New data library search and sorting functions

• New data archiving function

• New advanced plot type - L-IFFT

• New graphics rendering engine in Advanced Delay Finder

• Trace Info enhancements - control data set visibility

• Optimization to improve performance with large data libraries

• Output presets can now be changed while the Generator is ON

• Added option to change/set the generator level increment precision and allow .5 dB increments

• “Delete" hotkey is now supported in Measurement Config flyout

• Added magnitude thresholding to the Find Delay calculation

• Averaging type is now forced to Complex only when the FTW checkbox in the Control Bar is checked

• Added “Alt + J" hotkey to open Advanced Preferences

• When a folder of data is imported, subdirectories are now also imported

• Added” Make Session Folder" option to the right-click menu for folders in the Data Library

• Fixed a bug where captured TF traces did not use the correct Smoothing value

Smaart RT (v9.1.7) - Released 10 July 2023

• Improved click-ability of traces in plots

• Improved user experience when using "SyncSource TF" with TF engines that don't follow the global FFT size

• Improved behavior when an audio device's channel count changes (Dante)

• Removed hot plug/automatic device detection in the Windows build and replaced with a "Refresh" button in I-O Config

• Fixed a crash that could occur if an API connection was intermittent

• Fixed a bug where the "Signal" droplist in the Signal Generator Dialog might be empty

• Fixed a bug where multi-selecting and dragging traces to the plot would only show the first trace

• Fixed a bug where stopping an engine would not remove the trace from the plot in Multi Spectrum view

• Fixed a bug where the auto-populated trace capture name did not update after renaming a measurement engine

• Fixed a bug where engine name uniqueness was not being enforced in some circumstances

• Fixed a bug where an engine's outline color did not update immediately after changing the engine color

• Fixed a bug where the Target Curve list did not update immediately after importing a target curve

• Fixed a bug where Decade-scale frequency labels were incorrect

• Fixed a bug where some hotkey presses would affect multiple traces in the Windows build

• Fixed a bug where the Client Window input meters would flash

• Fixed various bugs related to Live/Captured Averages

• Fixed various bugs related to locked/peak cursors

• A name is now required when renaming captured traces and live engines

Smaart RT (v9.1.6) - Released 5 May 2023

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

IMPORTANT: AS OF THIS VERSION, SMAART V9 IS NOT COMPATIBLE WITH MACOS HIGH SIERRA (10.13)!! See tech bulletin for details: https://tinyurl.com/2uwadn5s

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

• Enhanced overall app performance, especially on Apple Silicon

• Fixed various issues with full-screening application windows in macOS

• The Signal Generator stimulus droplist in the Control Bar now correctly limits choices when SyncSource™ is enabled

• Fixed a bug where the Y axis labels were incorrect if the value was more than 999

• Fixed a crash that occurred when starting or stopping a Live TF Average when “Always Calculate” (LIR) was unchecked in TF Measurement Settings

• Fixed a crash that occurred in the Windows build when moving cursor focus between text fields

• Fixed a crash that occurred when Restoring Defaults immediately after Restoring Defaults