--- title: "Import Trace Data File" slug: "import-trace-data-file" updated: 2026-09-10T16:18:56Z published: 2026-09-10T16:18:56Z canonical: "doc360.rationalacoustics.com/import-trace-data-file" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Import Trace Data File The *File > Import > Trace Data File* command (keyboard shortcut: [Ctrl/Cmd] + [L]) imports Smaart data files from other locations into your data library – the location on your hard drive (or other storage device) that you have designated as the storage location for data files in your current session. Smaart Suite, RT, and LE can read Spectrum (.srf) and Transfer Function (.trf) data files from Smaart v7 or later. Smaart Suite is also able to read Impulse Response measurement data stored in .wav or .aiff audio files. Smaart Suite and Smaart SPL are able to read SPL logs stored as .txt files, as well. To import a trace into your data library, select *File > Import > Trace Data File* from the file menu or press [Ctrl/Cmd] + [L] on your keyboard. Either of these actions opens the *Load Reference File* dialog, where you can navigate to the location of the data that you want to import, select the file(s) that you want to import, and then click the *Open* button. If you are loading .ref files they will be converted to the appropriate native file type (.srf or .trf) automatically. Notice that the dialog that appears will only show you native data files that match the active graph selection in the active Smaart window. In real-time mode, if the active graph is a transfer function (Magnitude, Phase or Live IR) graph, you will see only .trf files. If the active graph is an RTA or Spectrograph, you will see only .srf files. In IR mode, Smaart will show you only .wav or .aiff files. Note that legacy .ref files from older versions of Smaart can contain either spectrum or transfer function data. You cannot tell what type of data they contain by looking at the file name, and so if you select a .ref file for import and nothing happens, try switching the graph type. Keep in mind that spectrum files have absolute dB levels associated with their data points, so there might be cases where the import is successful but the data is off the screen – for example, if your RTA display is calibrated to SPL and the imported file was captured with Full Scale calibration. In that case however, you would still see the trace name and its icon added to the graph legend. If you make the imported trace the front trace and run your mouse cursor across the graph, the cursor readout can tell you where to look for the data. > **Note: Smaart cannot open reference group (.rgp) files from older versions of Smaart, Smaart Pro, or SmaartLive. If you have data stored in an .rgp file that you want to import into Smaart v9, you will need to open it in a compatible version of SmaartLive or Smaart Pro and save the traces that you want to open in Smaart v9 as trace (.srf or .trf) files.** The frequency content of a given signal. The frequency (magnitude and phase) response of a system, function or network. The transfer function of the linear time invariant (LTI) system can be measured directly, using techniques such as dual-FFT transfer function measurements that compare the output of the system to its input signal in the frequency domain, or by taking the Fourier transform of the system’s impulse response. The signal that describes the response of a system to an ideal impulsive stimulus in the time domain. The impulse response of linear time invariant (LTI) system is the inverse Fourier transform of its frequency-domain transfer function. 1. A number assigned to a quantity so that it may be compared with other quantities. 2. The absolute value of amplitude. As a convention, we most often use the terms amplitude to refer to linearly scaled quantities and magnitude when discussing amplitudes cast in logarithmic units such as decibels or orders of magnitude. Phase, or Phase shift is a timing difference in a signal (relative to some reference) at one or more frequencies, typically expressed in degrees, where 360° = one full cycle at a given frequency. The Real-Time Analyzer (RTA) enables you to look at the frequency content of signals moment-by-moment in real time. The RTA is a graph of the energy in an incoming signal, broken down by frequency or frequency ranges, with frequency (in Hertz) on the x axis and magnitude (energy) on the y axis in decibels (dB) A three-dimensional data plot, displayed in two dimensions with color representing the third dimension (or z-axis). The spectrograph is a topographical representation of the once-common waterfall display. The term full scale (FS) has two possible meanings in digital signal processing. Normalized full scale refers to the maximum amplitude of a digital signal sampled at a given integer sample word size (bits per sample), scaled to +/- 1.0, such that 0 dB corresponds to the maximum possible peak signal value and all lesser decibel values are negative. A second convention preferred by the Audio Engineering Society (AES) references 0 dB to the RMS value of a full-scale peak-to-peak sinewave (i.e., 0.7071 rather than 1.0). In Smaart, all FS decibel values are referenced to normalized full scale, meaning that the RMS power of a full scale sinewave is -3.01 dB. When using a linear amplitude scale, Full Scale amplitude values are typically given as percentages, where 100% = 1.