--- title: "I-O Config" slug: "i-o-config" updated: 2026-08-27T19:49:53Z published: 2026-08-27T19:49:53Z canonical: "doc360.rationalacoustics.com/i-o-config" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # I-O Config The *I-O Config* command (keyboard shortcut [Alt/Option] + [A]) opens the *I-O Config* dialog. Here you can select, name, and calibrate any input/output devices and individual channels to use with Smaart. Live metering is available for any selected input channels as well as controls if Smaart detects an interface with direct integration. > **A Note on Windows drivers:** > > If you have both Wave and ASIO drivers installed for an I-O device with more than two channels, it will typically show up as one ASIO device and multiple Wave devices. This is due to a technical limitation of Waves drivers; They can only support two input channels per I-O device. You can have Smaart hide either ASIO or Wave drivers via checkbox in [*Audio preferences*](/v1/docs/audio) – If both boxes are un-checked, all drivers will be hidden. ## Input Config The *Inputs* tab in *I-O Config* consists of two tables: The upper table lists all input devices for which Smaart has detected drivers, and the lower table lists the input channels associated with the currently selected device. Users of previous versions of Smaart may note that Smaart’s global Sample Rate and Buffer Size are no longer present in *I-O Config,* but can instead be set from [*Options > Preferences > Audio*](/v1/docs/audio-options)*.* ## Configuring Input Devices The input devices table is comprised of four columns, labeled *Use*, *API: Driver Name*, Friendly Name, and *Status*. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(82).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A50%3A07Z&se=2026-11-18T18%3A50%3A07Z&sr=b&sp=r&sig=UaDHzB9sUmjperiJ%2BgG6TU7%2FTIz1eoM2obtrbc9Pjf4%3D) *The Input tab of the I-O Config dialog.* - To select a device for use in Smaart, click its check box in the ***Use*** column. - The ***API : Driver Name*** column lists input devices by the names that their drivers report to the operating system. On Mac OS X, all devices will use the CoreAudio API. Windows machines may have ASIO and Wave API devices and some devices may appear as both types. - Clicking on any entry in the ***Friendly Name*** column allows you to alter the displayed name for that input. Press the [Enter] key after editing to apply any changes. - ***Status*** – A device’s status will either be *OK* if Smaart was able to connect to it successfully or *N/C* if Smaart is unable to connect. This can mean that Smaart remembers the device, but it is not currently connected. Alternatively, if the device *is* present and connected, this can be indicative of a hardware or software problem preventing Smaart from communicating such as a hung device driver, a loose cable, or perhaps the device has become unresponsive and needs a reboot. - You can remove an *N/C* device from the list by selecting it and clicking the ***Remove*** button below the devices table. - On Windows, there is a ***Refresh*** button to the left of *Remove* that will prompt Smaart to re-check for new device connections (and disconnections). The MacOS version of Smaart performs this check continuously while open, so this button isn’t present. ## Configuring Input Channels When an input device is selected for use, its output channels are listed in the channels table below. When multiple devices are selected for use, a new tab is added to this table for each device. This table has 7 columns, the rightmost of which contains a live signal level meter for selected each input. - The checkboxes in the ***Use*** column work the same as in the devices table above: All checked inputs will be used and all unchecked inputs will be ignored. Selecting an input device for use automatically creates a new Spectrum engine using its *Friendly Name.* - The ***Channel (Ch)*** column lists channels by number as reported by the driver. - The ***Channel Name*** column lists each input as named by its driver. These are not editable. - Clicking on an input’s ***Friendly Name*** allows you to change its name as displayed within Smaart. Pressing the [Enter] key applies these changes and selects the next input on the list. - The numbers in the ***Cal. Offset*** column represent the difference in decibels (dB) between each input channel’s full-scale digital Amplitude and its calibrated level. A calibration offset of zero means the input is uncalibrated and set to digital Full Scale (dBFS). When an input is calibrated for SPL measurement, you will see a positive number (typically > 100) in this column. While you *can* edit these calibration offset values manually, these are ideally populated by running the [calibration routine](/v1/docs/sound-level-spl-leq-calibration) within the *Calibration* dialog. - The ***Mic Correction Curve*** selectors assign microphone correction curves to input channels. **This feature is not present in Smaart SPL.** Below the *channels* table are two buttons: - The ***Clear Settings*** button will clear out any calibration offsets and microphone correction curves while resetting inputs’ friendly names to their driver-reported default names. (A warning message pops up first in case you click the button by accident.) - The ***Calibrate*** button opens the *Amplitude Calibration* dialog with the current input selected for calibration. - If the selected device has direct Smaart integration (such as the Smaart I-O, [Roland® OCTA-CAPTURE™](/v1/docs/roland-octa-capture-control-integration), or [Audient® EVO 4/8/16](/v1/docs/audient-evo-control-integration)), an additional checkbox labeled [*Gain Tracking*](https://rational-acoustics.document360.io/docs/389f6b06-3855-4454-823b-5746090e6aca?isPreview=true&versionNumber=1) appears. When this box is checked, Smaart will adjust the calibration offset values for the device’s calibrated inputs in response to gain changes. The accuracy of these adjustments is dependent upon the accuracy of the input device's gain steps, which can vary between products (or even from one device of a specific model to another). Smaart can control only one OCTA-CAPTURE or EVO device at a time. ## Output Config The *Output* page of the *I-O Config* dialog controls routing for Smaart's signal generator. Much like in the *Inputs* page, this page’s upper table lists all available output devices and its lower table lists all available output channels for the currently selected device. ## Configuring Output Devices At the top of the *Output* tab is a table comprised of four columns labeled *Use, API: Driver Name, Friendly Name,* and *Status*. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/base64-converted-image-1787860169681.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A50%3A07Z&se=2026-11-18T18%3A50%3A07Z&sr=b&sp=r&sig=WzFV%2Fr6RXWk%2FWtAfSDAGp5%2BSIczToPylaKeHF3ThlX4%3D) *The Output tab of the I-O Config dialog.* - To select a device for use in Smaart, click its check box in the ***Use*** column. - The ***API : Driver Name*** column lists input devices by the names that their drivers report to the operating system. On Mac OS X, all devices will use the CoreAudio API. Windows machines may have ASIO and Wave API devices and some devices may appear as both types. - Clicking on any entry in the ***Friendly Name*** column allows you to alter the displayed name for that input. Press the [Enter] key after editing to apply any changes. - ***Status*** – A device’s status will either be *OK* if Smaart was able to connect to it successfully or *N/C* if Smaart is unable to connect. This can mean that Smaart remembers the device, but it is not currently connected. Alternatively, if the device *is* present and connected, this can be indicative of a hardware or software problem preventing Smaart from communicating such as a hung device driver, a loose cable, or perhaps the device has become unresponsive and needs a reboot. - You can remove an *N/C* device from the list by selecting it and clicking the ***Remove*** button below the devices table. - On Windows, there is a ***Refresh*** button to the left of *Remove* that will prompt Smaart to re-check for new device connections (and disconnections). The MacOS version of Smaart performs this check continuously while open, so this button isn’t present. ## Configuring Output Channels Below the devices table is another table listing the individual channels for the selected device in the table above. Notice that a new tab is added to the channels table for each device that you designate for use. In this case, the layout of the table depends on the device type selection (Input Devices or Output Devices) at the top of the page, but the only user-specifiable option for output channels is the *Friendly Name* which we have already talked about. The Output channels table has typically has 5 columns: - To route signal to an output channel from the signal generator, check its checkbox in the ***Use*** column. - The ***Channel (Ch)*** column lists channels by number as reported by the driver. - The ***Channel Name*** column lists the official (driver-reported) channel names. These are not editable. - Clicking on an input’s ***Friendly Name*** allows you to change its name as displayed within Smaart. Pressing the [Enter] key applies these changes and selects the next input on the list. - You can apply a relative output Attenuation to individual output channels by entering a value in dBFS in the ***Trim*** column – just type in the number of dB that you want to attenuate by and press the [Enter] key. Smaart will add the minus sign for you. - Below the channels table are two buttons whose functions are as follows: - The ***Clear Settings*** button will clear out and reset friendly names assigned to output channels to their driver-reported default names. (A warning message pops up first in case you click the button by accident.) - The ***Reset Trims*** button resets all output trim values to 0 dB. ## Smaart Loopback [Embedded content](https://www.youtube.com/embed/NYFnICfpdEA) Replacing the *Generator* input device, the new Smaart Loopback feature enables any output selected for use to appear as an input channel for the same device. To enable Smaart Loopback, navigate to *Config > I-O Config* and select the Smaart Loopback checkbox. Once enabled, output channels become available in the input channel selection dropdowns for the output device. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/base64-converted-image-1787860169682.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A50%3A07Z&se=2026-11-18T18%3A50%3A07Z&sr=b&sp=r&sig=ppeN22xVRea891zLWLMsEpbsOiX8ucjmT24OSHoW6C0%3D) *The Output tab of the I-O Config dialog featuring the Enable Smaart Loopback checkbox.* Note the Transfer Function measurement engines referenced to Smaart Loopback are not delay-compensated. The resultant delay times will be the Propagation Delay of the measurement, with additional delay between the USB buffers of the audio device in use and the Smaart Loopback channel. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(162).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A50%3A07Z&se=2026-11-18T18%3A50%3A07Z&sr=b&sp=r&sig=p3dGpkUAn9F4V55PuiTtG4sUWbmqQX1R%2F%2BXEG5mU5tg%3D) *Smaart Loopback channels displayed as Input channel options.* ## Output Presets To the right of the channels table is a section labeled *Output Preset Manager*, with a table showing any output presets that you have configured. To create a preset, select the device(s) and output channels that you want to route signal to and trim the output channels as necessary (as described in the previous section), then click the *Store* button. To recall a stored preset, select its name in the list and click the *Make Active* button. You can also do this by selecting your desired preset from the fly-up dialogue within the controls for the Signal Generator, which will read "Configure..." by default. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/base64-converted-image-1787860169683.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A50%3A07Z&se=2026-11-18T18%3A50%3A07Z&sr=b&sp=r&sig=kTXgZyGhWVLhfbqrZvghtNtSs9%2BgQj7gtf5cABSmu8A%3D) *The Output Preset Manager (left) and an available Output Preset being selected (right).* Note that selecting the name of an existing preset in the *Output Preset Manager* table immediately “previews” it, by setting all device and channel *“Use”* selections and output trims to the states stored in the preset. However, these selections are not actually applied until you click the "Make Active" button. You can also recall an output preset by selecting it from the signal generator control section on the Control Bar in the main window. Output presets can be changed while the Signal Generator is active. To delete a preset, select its name in the list and click the *Delete* button below the table. To reorder the preset list select the name of a preset that you want to move and use the up/down (▲|▼) buttons below the table to move it up or down to a different storage slot. The number of times that the amplitude of a signal is measured within a given period of time in analog-to-digital conversion. For audio-frequency signals, sampling rate is typically expressed in samples/second or Hertz. The amount of time allowed for your computer to process the audio of your sound card or audio interface. Manipulating buffer size is a tradeoff between latency and computer processing burden. A low buffer size can cause audio dropouts, while a high buffer size can cause latency. For use with Smaart, a minimum buffer size of 1024 is recommended. An I-O device or input’s displayed name within Smaart. This is determined by your device’s driver by default but can be changed manually from within the *I-O Config* dialog. The frequency content of a given signal. In signal processing, the maximum deviation from zero in an alternating signal in either the positive or negative direction, typically expressed in volts for an electrical signal, or as a fractional quantity or percentage of Full Scale, in the case of digital signal. The term full scale (FS) has two possible meanings in digital signal processing. Normalized full scale refers to the maximum amplitude of a digital signal sampled at a given integer sample word size (bits per sample), scaled to +/- 1.0, such that 0 dB corresponds to the maximum possible peak signal value and all lesser decibel values are negative. A second convention preferred by the Audio Engineering Society (AES) references 0 dB to the RMS value of a full-scale peak-to-peak sinewave (i.e., 0.7071 rather than 1.0). In Smaart, all FS decibel values are referenced to normalized full scale, meaning that the RMS power of a full scale sinewave is -3.01 dB. When using a linear amplitude scale, Full Scale amplitude values are typically given as percentages, where 100% = 1. A decrease in the level of a signal. Attenuation can refer to reduction in level for a specified frequency range or a decrease in the overall level. The frequency (magnitude and phase) response of a system, function or network. The transfer function of the linear time invariant (LTI) system can be measured directly, using techniques such as dual-FFT transfer function measurements that compare the output of the system to its input signal in the frequency domain, or by taking the Fourier transform of the system’s impulse response. The time it takes for sound to travel from one place (such as a loudspeaker) to another place (e.g., a measurement microphone).