--- title: "What is (Legacy) MTW+?" slug: "what-is-legacy-mtw" updated: 2026-08-20T20:22:00Z published: 2026-08-20T20:22:00Z canonical: "doc360.rationalacoustics.com/what-is-legacy-mtw" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # What is (Legacy) MTW+? > **Note: in Smaart v9, this feature is retained simply as "MTW". This replaces the non-"plus" version of MTW from Smaart v7 and v8.** Introduced in Smaart v8.5.0, MTW+ is a supercharged version of MTW that uses more FFTs across the measured frequency range and reduces gaps in the MTW calculation pipeline that may result in missing rapid transient events. MTW+ uses a Hamming data window, while MTW uses a Hann window. At this time, it is not possible to average MTW+ traces with traces derived from MTW/power-of-2 FFTs. This option is only available for Transfer Function measurements. MTW+ is available as an FFT choice on a global or per-measurement level, and it supports both 48k and 96k sample rates. The program default is still “MTW”. To enable globally, go to Options > Transfer Function and change the FFT size under "General Settings" (at the top) to 'MTW+'. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(377).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A24%3A05Z&se=2026-11-18T18%3A24%3A05Z&sr=b&sp=r&sig=A%2BnII8mLyjAa97AAdEEw4zznvaqeddzrMVzT4VqaTkE%3D) *Setting MTW+ globally.* To set a single TF engine to use MTW+, double-click on the measurement engine to bring up its settings, un-check "Use Global" to the right of FFT, and change the selection to 'MTW+'. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(378).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A24%3A05Z&se=2026-11-18T18%3A24%3A05Z&sr=b&sp=r&sig=Dyg44cF2AordMwRqIlTl%2F09U7hB1Bt6OXxqPgMrYf9w%3D) *Setting MTW+ for a single TF engine.* The frequency (magnitude and phase) response of a system, function or network. The transfer function of the linear time invariant (LTI) system can be measured directly, using techniques such as dual-FFT transfer function measurements that compare the output of the system to its input signal in the frequency domain, or by taking the Fourier transform of the system’s impulse response.