--- title: "Trace Info (Real Time Mode)" slug: "trace-info" updated: 2026-08-21T17:19:50Z published: 2026-08-21T17:19:50Z canonical: "doc360.rationalacoustics.com/trace-info" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Trace Info (Real Time Mode) The *Trace Info* dialog can be opened by clicking the Info button at the bottom of the data bar (or pressing the [Enter] key on your keyboard) when a single trace is selected in the data bar pane. Or you can right-click ([Ctrl]+click on Mac) on a file in the library pane and select *Info* from the pop-up context menu. ![Trace Info dialog for a Spectrum trace (left) and for a Transfer Function trace (right).](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(72).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A06Z&se=2026-11-18T18%3A42%3A06Z&sr=b&sp=r&sig=EXAcgA%2BwWB2id1BpblA5rmiGSQOdwdva%2B6qrYgl1aDk%3D) *Trace Info dialog for a* Spectrum *trace (left) and for a* Transfer Function *trace (right).* In the upper portion of the *Trace Info* dialog, you will find a list of everything that Smaart knows about the selected trace and the measurement from which it was captured. The list will vary according to the measurement type but should be self-explanatory. Below the vital statistics are controls for editable properties of the data file. Two of these, the color assignment and comment text (if applicable) are stored in the data file. Other settings are cached in the config file for recently used data traces but do not accompany the file if you make a copy or change configurations. Here again, the available options vary somewhat according to the file type. All file types have a *Name* field. This is both the name of the data file (.srt, .trf, or .wav) and the display name for the trace in Smaart. Editing this field results in the file being renamed when you click the OK button. Spectrum (.srf) and transfer function (.trf) also have an editable *Comment* field. Comment text is stored directly in the data file. The *Color* tile shows the trace color assigned to a data trace. Trace colors are randomly assigned when a file is captured but you can choose a specific color by clicking on the tile to open a color picker dialog. Your new selection will be stored in the data file when you click the *OK* button. The *dB Offse*t setting moves a spectrum or transfer function trace up or down on applicable charts. Positive values move the trace up on the chart by the specified number of decibels. Negative numbers move it down. Note that dB offsets are not stored in the data file. The *Weighting* control assigns a weighting curve to a spectrum or transfer function trace. Smaart has built-in curves for A and C weight curves used in SPL and Leq measurements with normal and inverted versions of each. You can also create your own weighting curves from transfer function data traces or by importing ASCII text files. See [*Weighting Curves*](/v1/docs/weighting-curves) for more about custom weighting curves. The ***Averaging Type*** control allows you to switch between the displayed Magnitude average type (Polar or Complex). Note that this will only work for traces captured in v9.1 or newer (where both Polar and Complex data sets are being calculated regardless of the current selection). The ***FFT Type*** control allows you to switch between displaying MTW or the FFT type that the trace was captured with (if MTW was selected at the time of capture, 32k is provided by default). Note that some legacy (pre-v9) traces may only show the single FFT type. The ***Plot*** number sets the preferred graph assignment for each trace when two graphs of the same type are displayed in the main graph area. If this is set to 1 (the default setting), the trace will appear in the first of the two graphs to be displayed. If it is set to 2, the trace will move itself to the second of the two graphs. This setting is ignored when only one graph of a given type is displayed. The ***Invert Mag Display*** check box (transfer function traces only) flips the magnitude spectrum of a transfer function trace upside down when checked. This option can be handy for setting loudspeaker EQ curves. The Phase spectrum is unaffected by this setting. The ***Save As*** button in the *Trace Info* dialog does the same thing as the *Save As* command in the [Data Bar menu](/v1/docs/data-bar-menus). It opens a file dialog window, enabling you to save a copy the trace data file to any location in your file system. ***Export to ASCII*** exports the trace data from selected data files to tab-delimited ASCII text files. You will be prompted to choose a destination directory for the exported files or create one. Exported text files are named automatically with the same names as the Smaart data files. Both *Export to ASCII* and the *Copy to ASCII* function (see below), export data traces with the same smoothing or banding settings currently selected in Smaart, so what you see is what you get. The ***Copy to ASCII*** button copies trace data to the operating system’s clipboard in tab-delimited ASCII text format, suitable for pasting into a spreadsheet, text editor or any other program that accepts ASCII text. See the [Data Trace Import](/v1/docs/data-trace-import) article for more information on ASCII. The **arrow buttons (< and >)** at the bottom allow you to scroll between the trace info of stored traces within the same folder as the currently-selected trace. The frequency content of a given signal. The frequency (magnitude and phase) response of a system, function or network. The transfer function of the linear time invariant (LTI) system can be measured directly, using techniques such as dual-FFT transfer function measurements that compare the output of the system to its input signal in the frequency domain, or by taking the Fourier transform of the system’s impulse response. 1. A number assigned to a quantity so that it may be compared with other quantities. 2. The absolute value of amplitude. As a convention, we most often use the terms amplitude to refer to linearly scaled quantities and magnitude when discussing amplitudes cast in logarithmic units such as decibels or orders of magnitude. Phase, or Phase shift is a timing difference in a signal (relative to some reference) at one or more frequencies, typically expressed in degrees, where 360° = one full cycle at a given frequency.