Smaart Won't Recognize an Audio Device (v8/Di v2/SPL v1)

Prev Next

This article is for troubleshooting audio devices in Smaart v8. This also extends to Smaart Di v2 and Smaart SPL, but some visuals and features may vary.

If you are running Smaart on MacOS 10.14 (Mojave) or newer, please first refer to this support article.

When having audio device issues with Smaart, is it incredibly important to start at the source and work into Smaart. 99% of the time, these types of issues originate from outside of Smaart.

Is the device powered on and plugged in?

Check to see if your operating system recognizes the device. Navigate to the audio devices control panel and see if the device is showing up and able to play system sounds or audio from other applications. If your OS does not recognize the device, Smaart certainly won't either!

Is the driver installed, and installed correctly?

Smaart works with any audio I/O device that your operating system recognizes as a valid WAV/WDM, ASIO (Windows), or CoreAudio (macOS) device, but the OS won't recognize your device if the driver is not installed. Many audio devices come with a CD-ROM that contains drivers, device control software, and a user manual. If this is the case, then take that CD, walk to your nearest trash receptacle, and throw it away. By the time the product gets to you the drivers on the CD are almost always outdated. Don't risk installing buggy or outdated software; Go directly to the manufacturer's website and download the latest drivers and control software for your device.

If the device is critical to your work, we recommend that you buy a dedicated USB drive and always have the latest drivers and software loaded onto it.

As of v8.0.2, Smaart creates an audio device log (called “Devices.txt”) every time it starts up. If Smaart won't get past the splash screen, any sort of audio device issue will be recorded in this log. If Smaart isn’t fully booting, please send this log to support@rationalacoustics.com and we can help diagnose and resolve the issue for you.

This log can be found here:

  • macOS: (MacintoshHD)/<user>/Documents/Smaart v8/Logs/

  • Windows: C:\Users\<user>\Documents\Smaart v8\Logs\

After verifying that the device is detected by your operating system, open Smaart and navigate to the Config I-O dialog. This can be done by navigating to Config > I-O Config or using the [Alt/Opt] + [A]. If “N/C” is shown next to the device, it indicates either a connection issue with the physical device itself or an issue with its drivers. If it doesn’t show at all, then uninstalling and reinstalling the driver one more time may be needed.

Finally, ensure the "Use" checkbox is checked off in the I-O Config dialog. This is different from Smaart v7, where it was an “Ignore” checkbox. We actually want you to check it off this time!