--- title: "Smaart Loopback" slug: "smaart-loopback" updated: 2026-09-18T18:43:06Z published: 2026-09-18T18:43:06Z canonical: "doc360.rationalacoustics.com/smaart-loopback" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Smaart Loopback Enabling Smaart Loopback allows any enabled output channel to also appear as a selectable input during measurement engine creation. This allows *any* device to act as the generator, creating a stable relationship in time between Smaart's generator loopback and your input device. [Embedded content](https://www.youtube.com/embed/NYFnICfpdEA) --- ## To Use Smaart Loopback: 1. Open *I-O Config* either by navigating to [*Config > I-O Config*](/v1/docs/i-o-config) or by using the [Alt/Option] + [A] hot key. 2. Select any desired input and output device(s) and channel(s). 3. Click the checkbox labeled “Enable Smaart Loopback” to check it. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(631).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A07Z&se=2026-11-18T18%3A42%3A07Z&sr=b&sp=r&sig=UCbdM1boPE38ONS5z%2BZc4RFUaANpp361KLltKw6mBY0%3D) 1. You will be met with a quick warning message by default. The Transfer Function measurement engines referencing Smaart Loopback are **not** delay-compensated, so the resultant delay times will be the sum of the measurement loop’s processing, Propagation Delay **and** the delay of any audio buffers in use in the Smaart Loopback channel. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(632).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A07Z&se=2026-11-18T18%3A42%3A07Z&sr=b&sp=r&sig=22N1Xn2RUYj42Zefzc2R%2FENxSVJmpIhdmwbjgZFVEI0%3D) While this warning may have a jarring appearance, it is simply there to notify you of this additional Latency and should not affect the outcome of your measurement. Depending on what you're measuring with Smaart Loopback, this additional latency should not affect your tuning decisions (although it can seem alarming without a heads-up). > [!WARNING] > **If you are using Wave drivers on Windows, your interface's inputs are treated as a different device from its outputs.** > > **As such, you will also need to enable "Multi-Device TF" in the *Advanced Settings* menu to use Smaart loopback. This menu can be accessed by either navigating to** [***Options > Preferences > Advanced***](/v1/docs/advanced-preferences-1) **or by using the [Alt/Option] + [J] hotkey.** > > ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(628).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A07Z&se=2026-11-18T18%3A42%3A07Z&sr=b&sp=r&sig=qjSU%2Fnyv4s3FgIEK4ShcqgoBkR8mPpjJrsRB1DMPllI%3D) > > **The delay added due to the difference in input and output drivers while using the Multi Device TF setting will compound with the additional delay added by Smaart Loopback. To avoid this, we recommend choosing ASIO drivers over Wave, if possible.** 1. In your measurement engine configuration channel dropdown, select the output channel under the Smaart Loopback header. All outputs you selected for use will show up as inputs under the corresponding device. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(629).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A07Z&se=2026-11-18T18%3A42%3A07Z&sr=b&sp=r&sig=k1sKBXFVf%2FTeoSvJuHXf2TAQ8mw6adGTKPv5wnqWgWI%3D) From there on, you can set up your measurement channels as usual and you're ready to measure! The time it takes for sound to travel from one place (such as a loudspeaker) to another place (e.g., a measurement microphone). In signal processing, latency refers to the throughput delay for a device or signal chain. All digital signal processing devices introduce some amount of latency into a signal chain.