--- title: "Removed D/R Calculation from IR Mode" slug: "removed-dr-calculation-from-ir-mode" updated: 2026-03-27T20:36:29Z published: 2026-03-27T20:36:29Z canonical: "doc360.rationalacoustics.com/removed-dr-calculation-from-ir-mode" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Removed D/R Calculation from IR Mode The D/R calculation was based off an earlier common analysis software’s 3 point (Ld, Lr, Ln) GUI for identifying decay slopes where D/R was a ratio of the direct arrival (Ld) to the 10 dB down point from that (Lr). Ln represented the noise floor. The issue being that the ratio is always the same because the values from Ld to Lr are always the same (-10dB). Being that D/R is therefore a dubious calculation, it has been removed so that we may revisit the concept in a future release.