--- title: "Power vs dB Average for Live Spectrum Average SPL" slug: "power-vs-db-average-for-live-spectrum-average-spl-1" updated: 2026-03-27T20:32:35Z published: 2026-03-27T20:32:35Z canonical: "doc360.rationalacoustics.com/power-vs-db-average-for-live-spectrum-average-spl-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Power vs dB Average for Live Spectrum Average SPL ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/9.7b1readme-image-373pscix.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=GMCOefBF7kWldSkMKzwqd23iIGly7De5DySO4weuIGA%3D) When creating a new Spectrum Average, if all contributors are calibrated for SPL Smaart will calculate and display the average SPL values for A, C, and Z in the plot. When the spectrum average is set to dB, the SPL average is the average of the dB SPL numbers from the individual contributors. When the spectrum average is set to dB, the individual contributor dB SPL numbers are converted to power, averaged as power, then the average result is converted back to dB. Power averaging gives more prominence to louder inputs than dB averaging: however the result is a dB number in both cases. If any of the contributors to an average measurement are not calibrated for SPL, there is no SPL average calculation.