--- title: "Toggle Peak Hold" slug: "peak-hold" updated: 2026-05-08T12:43:57Z published: 2026-05-08T12:43:57Z canonical: "doc360.rationalacoustics.com/peak-hold" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Toggle Peak Hold The *Toggle Peak Hold* command (hot key [P]) turns peak hold for the RTA graph on or off. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(126).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A09Z&se=2026-11-18T18%3A42%3A09Z&sr=b&sp=r&sig=ImI%2BwdxEvtMJj1YpyEsPH%2F8Y1F7M9xAmAWSsLVim0zs%3D) *RTA Plot with Peak Hold active.* Peak hold provides a visual record of the highest magnitudes measured at each frequency on the RTA graph within a specified hold time. Peak Hold can be useful for identifying transient peaks or feedback frequencies, and adds a useful historical record of the worst-case levels at each frequency to an otherwise highly dynamic display. Peak hold settings can be found in the [*Spectrum Graph Settings*](/v1/docs/spectrum-graph-settings) dialog. The Real-Time Analyzer (RTA) enables you to look at the frequency content of signals moment-by-moment in real time. The RTA is a graph of the energy in an incoming signal, broken down by frequency or frequency ranges, with frequency (in Hertz) on the x axis and magnitude (energy) on the y axis in decibels (dB)