--- title: "IR Mode Plot Legend" slug: "ir-graph-legend" updated: 2026-06-24T18:28:01Z published: 2026-06-24T18:28:01Z canonical: "doc360.rationalacoustics.com/ir-graph-legend" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # IR Mode Plot Legend ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(39).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A10Z&se=2026-11-18T18%3A42%3A10Z&sr=b&sp=r&sig=IPHYoI2JBDEL3XH9Q6euaDmMOdh4OVWCGreVGebNrP4%3D)Clicking on the name of the front trace in the upper right corner of a main graph pane will open its legend box. The graph legend lists new measurements that are currently displayed on the graph as well as any captured measurements that are currently selected for display on the [Data Bar](/v1/docs/data-bar-and-trace-info). ![IR Mode Graph Legend Box](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(40).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A10Z&se=2026-11-18T18%3A42%3A10Z&sr=b&sp=r&sig=BAYQhsi213f3D3nA4klxZr82tVeRcmx6zM8baBCn%2BTk%3D) IR Mode Graph Legend box Active live measurement engines appear in the legend as round buttons with the engine currently selected on the [Control Bar](/v1/docs/control-bar) indicated by an outline around it. Captured measurements stored in .wav files are represented by file icons (a page with the corner folded over). One trace is always selected, as indicated by the shaded background color. By default, the top entry in the legend list is selected but you can use the up and down arrow keys ([ ↑ ] / [ ↓ ]) on your keyboard to change the selection. When a trace is displayed with vertical (y-axis) offset, the offset value in Decibels is shown to the right of the name. Clicking on the name of a live or captured trace in the legend box selects the object and moves it to the top of the legend list. This also makes it the top trace in the z-axis stack on the corresponding graph(s). You can multi-select traces in the legend box by holding down the [Ctrl/Cmd] key while clicking their names with your mouse, or hold down the [Shift] key while clicking to select a contiguous group of objects. You can hide a trace by clicking its icon in the legend. When you do this, the trace is removed from the graph and an “X” is drawn though its show/hide button on the Control Bar if it is a live measurement, or its icon in the data library pane on the Data Bar if it is a captured data file. Clicking the icon or show/hide button for a hidden data file or live measurement removes the X and makes the trace visible on applicable graphs. Below the legend list are three buttons: - The ***Hide*** button hides a selected trace or group of traces and removes them from the graph. - The ***Sync Ld*** button offsets all IR displayed traces so that they Overlap at the highest peak found in the top trace in the z-axis stacking order (i.e., the trace at the top of the legend list) – this action can also be accomplished by holding down the [Shift] key on your keyboard while right-clicking on a time-Domain graph. - When two graphs of the same type are present, the ***Move*** button moves the selected trace(s) from the current graph to the other. The decibel, often abbreviated as dB, is a logarithmic ratio between two values. In electronics and acoustics, decibels most commonly refer to the ratio between a given amplitude value and the number 1, where some reference value such as the maximum output of an A/D converter (dB Full Scale or dBFS) or the threshold of audibility for human hearing (for dB SPL) is scaled to equal 1. The decibel value for an amplitude is then calculated as: dB = 20·Log10(A) = 10·Log10(A 2 ), where A is linear amplitude. In this case, amplitude values greater than one yield positive decibel values and numbers smaller than one become negative dB values. This is why dB FS values are most often negative and dB values in sound level measurements are nearly always positive. For Smaart’s purposes, the term Overlap refers to the amount of data each successive FFT Frame shares in common with the one before. Overlapping FFT frames are analogous to shingles on a roof. When no overlap is used, each new FFT frame begins where the last one stopped, as beads on a string. In signal processing, the term “domain” refers to the independent variable of a signal. By convention, when graphing a signal the independent variable is typically placed on the horizontal (x) axis of the plot with the dependent variable on the vertical (y) axis. For example in Smaart, an impulse response display, with time (the independent variable) on the x axis and amplitude (the dependent variable) on the y-axis, is referred to as a time domain display. Similarly, Spectrum and Transfer Function displays where magnitude or phase shift are plotted as a function of frequency are called frequencydomain displays.