--- title: "Cursor (Preferences)" slug: "cursor" status: "new" updated: 2026-10-22T19:35:52Z published: 2026-10-22T19:35:52Z canonical: "doc360.rationalacoustics.com/cursor" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Cursor (Preferences) The *Cursor* tab in the *Preferences* dialog contains controls that affect the behavior of the movable and locked cursors and what information appears in the cursor readout. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(100).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A05Z&se=2026-11-18T18%3A42%3A05Z&sr=b&sp=r&sig=9l9FtggXWDKiEBjOE6bAiIKDPsq3F7V23e05n7NGPK0%3D) *Options > Preferences > Cursor.* ## Cursor Behavior The two controls in this section echo the functions of the menu commands of the same name in the [*Cursor* section of the *Control* menu](/v1/docs/cursor-commands). - ***Free Cursor Tracks Data*** causes the movable cursor to snap to the nearest amplitude/magnitude value on the top trace in the z order as you move your mouse horizontally across a data plot. Turning this feature off allows the mouse cursor to move anywhere on the graph freely. This option can also be toggled using the [Ctrl/Cmd] + [Shift] + [F]) hot key. - ***Locked Cursor Tracks Data*** causes the Locked Cursor to track magnitude changes on a real-time plot at the frequency where it was set. This option can also be toggled using the [Ctrl/Cmd] + [Shift] + [L]) hot key. ## Cursor Frequency Readout The options in this section control what information appears in the cursor readouts for y-axis coordinates on frequency-domain plots. - ***Frequency*** – The cursor readout displays only frequency in Hertz for the frequency the mouse is currently hovering over. - ***Frequency and Wavelength*** – The cursor readout displays frequency in Hertz *and* the wavelength in feet or meters, based on time and temperature units selection in the [*Speed of Sound* section](/v1/docs/preferences-general#speed-of-sound). - ***Frequency and Note ID*** – cursor readout displays frequency in Hertz and the closest musical note corresponding to that frequency. ## Cursor Time Readout The cursor time readout setting applies to both Smaart Suite’s IR Mode and the *Live IR* plot on transfer function displays. - ***Milliseconds*** displays time coordinates and relative time differences in milliseconds only. - ***Milliseconds & Distance*** displays time coordinates as milliseconds and equivalent distance, based on the *Speed of Sound* settings. - ***Milliseconds & Samples*** displays time coordinates in samples and equivalent time in milliseconds, based on the currently.