--- title: "Real-Time Cursor Readout" slug: "cursor-readout" updated: 2026-09-18T20:50:35Z published: 2026-09-18T20:50:35Z canonical: "doc360.rationalacoustics.com/cursor-readout" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Real-Time Cursor Readout One of the most important analysis tools in Smaart is the mouse (or other pointing device). In addition to clicking buttons, interacting with control widgets and making menu selections, the mouse cursor is used to find the precise frequency, Amplitude, Phase or time coordinates (as applicable) of any point that interests you on any real-time or Impulse Response mode graph. When you position the cursor over any data plot in the graph area, the cursor readout above the main graph area displays the coordinates of the mouse cursor in amplitude, frequency or time units, depending on the chart type. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(65).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A06Z&se=2026-11-18T18%3A42%3A06Z&sr=b&sp=r&sig=5LUncf6glUIQ3JL%2BvGH2mY3KteKPwUK0Y52VfkkCiFE%3D) *The cursor readout shows coordinates for locked and movable cursors.* The cursor readout can also display Wavelength or Note ID on frequency-domain charts and distance units on time-domain graphs. These options are located on the General tab of the Preferences dialog window, accessible from the *Options* menu ([*Options >* *Preferences* *>* *General*](/v1/docs/general-options)). --- ## Mouse Cursor Tracks Data (or Not) As you move your mouse cursor over any graph in Smaart, assuming there is data visible on the graph, you will notice a set of “cross hairs” – a horizontal and vertical line extending all the way across the plot from left to right and top to bottom – following the mouse cursor as you move it around. The coordinates for the point where these two lines cross are reported in the numeric cursor readout. Most commonly we want to know the value of an actual data point, and so the default behavior for the movable cross-hair cursor, on all graph types except the Spectrograph, is to follow the mouse cursor horizontally but snap to the nearest amplitude/Magnitude data value on the vertical axis. If multiple traces are present the cursor tracks the front trace in the z order. You can turn off data tracking for the movable cursor by unselecting *Cursor > Free Cursor Tracks Data* in the *Command* menu (a check mark appears on the left of the menu line when the option is selected) or by pressing [Ctrl/Cmd] + [Shift] + [F] on your keyboard. On the spectrograph of course, both the x and y axes represent absolute coordinates and so the movable cursor is always tracking actual data no matter where on the graph you put it. --- ## Locked Cursors In addition to the movable (free) cursor, you can also set a second cursor called a “locked” cursor on most plots in Smaart – the exceptions being spectrograph charts, the Live IR graph in real-time mode and the small navigation pane in impulse response mode. When a locked cursor is present, the cursor readout gives you coordinates for both cursors and displays the difference between the two in brackets. To set a locked cursor, hold down the [Ctrl/Cmd] key on your keyboard while clicking some point on the plot that you are interested in, or press [Ctrl/Cmd] + [P] to set a locked cursor at the highest peak in the active plot. To remove a locked cursor press [Ctrl/Cmd] + [X]. If you turn on *Cursor > Locked Cursor Tracks Data* in the *Command* menu, or press [Ctrl/Cmd] + [Shift] + [L] on your keyboard the locked cursor will track the magnitude as it moves up and down. This option can be used in conjunction with the find peak function. In signal processing, the maximum deviation from zero in an alternating signal in either the positive or negative direction, typically expressed in volts for an electrical signal, or as a fractional quantity or percentage of Full Scale, in the case of digital signal. Phase, or Phase shift is a timing difference in a signal (relative to some reference) at one or more frequencies, typically expressed in degrees, where 360° = one full cycle at a given frequency. The signal that describes the response of a system to an ideal impulsive stimulus in the time domain. The impulse response of linear time invariant (LTI) system is the inverse Fourier transform of its frequency-domain transfer function. A three-dimensional data plot, displayed in two dimensions with color representing the third dimension (or z-axis). The spectrograph is a topographical representation of the once-common waterfall display. 1. A number assigned to a quantity so that it may be compared with other quantities. 2. The absolute value of amplitude. As a convention, we most often use the terms amplitude to refer to linearly scaled quantities and magnitude when discussing amplitudes cast in logarithmic units such as decibels or orders of magnitude.