--- title: "Creating a DSP Channel from Within Smaart" slug: "creating-a-dsp-channel-from-within-smaart" updated: 2026-09-01T20:33:22Z published: 2026-09-01T20:33:22Z canonical: "doc360.rationalacoustics.com/creating-a-dsp-channel-from-within-smaart" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating a DSP Channel from Within Smaart There are two main ways to create DSP channels from within Smaart Suite/RT/LE for use in Data Modeler. We'll begin with the easier of the two methods. --- ## Right-Click Method 1. Press [T] to enter Smaart’s Transfer Function view. 2. Right-click the Transfer Function trace(s) you'd like to export to in Data Modeler. 3. Select "Create DSP Channel from Selected." ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(581).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=CsmT%2BbEVwp8wqZqYu7ndlLgDJTtKbIKynEcsi%2Bkx8%2BQ%3D) 1. Choose to either create a new Data Modeler project for your trace or import it into an already saved project. When choosing to create a new project, you can also select the modeler type (mode), Sample Rate, and name the project. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(582).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=9ir64vxdv%2B56KujrI%2BNUjCJadJ%2Bau4rBPr25SpkqyRQ%3D) 1. Clicking *Export* will open a fresh window of Data Modeler with your trace loaded into a DSP channel. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(583).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=O1UU3PKdfV3G%2BNNm4pawQoUGXq2A9LIHiym%2BM0TBLSk%3D) From here, you can manipulate the trace using Data Modeler's DSP and other features. You can also create new DSP channels create sums, and drag new traces into your newly created Data Modeler project. --- ## Drag and Drop Method The second method for setting up a Data Modeler DSP channel from within Smaart is by simply dragging and dropping a trace from Smaart's Data Bar. 1. Open a new or existing Data Modeler project, selecting your desired number of DSP channels. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(584).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=MHKFyyv6uqPrKAriPC2JE5HHRS8uOobkRljIhS0CEyw%3D) 1. Open Smaart to its Transfer Function view. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(585).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=XTzrNoGI01%2FZdtX2HzupxX6fF%2BmIyLkjLDWjF2X1%2Fc0%3D) 1. Click and drag your traces directly from your window of Smaart into your desired DSP channel. When dragging the file over, you will see the DSP channel become highlighted green and a plus sign overlay will appear. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/image(586).png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A15Z&se=2026-11-18T18%3A30%3A15Z&sr=b&sp=r&sig=JvfUN2kCDIjFJkA49Fz70A34YgAcJ4QoF7lc%2Biy8zSM%3D) > **Note: You can also drag .trf files into a DSP channel from your operating system's file explorer. They are located within this folder:** > > - **On PC: *This PC > Documents > Smaart [Edition] > Data > Transfer Function*** > - **On Mac: *Macintosh HD > Documents > Smaart [Edition] > Data > Transfer Function*** The frequency (magnitude and phase) response of a system, function or network. The transfer function of the linear time invariant (LTI) system can be measured directly, using techniques such as dual-FFT transfer function measurements that compare the output of the system to its input signal in the frequency domain, or by taking the Fourier transform of the system’s impulse response. The number of times that the amplitude of a signal is measured within a given period of time in analog-to-digital conversion. For audio-frequency signals, sampling rate is typically expressed in samples/second or Hertz.