--- title: "Calculate and Display Spectrum SPL" slug: "calculate-and-display-spectrum-spl" updated: 2026-03-27T20:32:04Z published: 2026-03-27T20:32:04Z canonical: "doc360.rationalacoustics.com/calculate-and-display-spectrum-spl" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Calculate and Display Spectrum SPL ![A screenshot of a computer AI-generated content may be incorrect.](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/9.7b1readme-image-a4uddt0j.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A42%3A16Z&se=2026-11-18T18%3A42%3A16Z&sr=b&sp=r&sig=ahB6QXjpPrChx6ODqxcfHBsvs2WIhVIAXmPiBnPKJLM%3D) The *Advanced* tab of Smaart *Preferences (Menu Bar > Options > Preferences> Advanced, or hot key [Alt/Opt + J])* contains a new section for *Spectrum Settings*. Once *Calculate and Display Spectrum SPL* is selected, all calibrated inputs will display their SPL metrics for A/C/Z weight with Slow time integration in the upper right of the RTA plot, below the plot legend and weighting curve selection (if active). This display is separate from the SPL meter in the upper-right of the main GUI, the two are effectively unrelated. SPL values are calculated pre-FFT and are not affected by the banding selections of the plot.