--- title: "Boundary Effects" slug: "boundary-effects" updated: 2026-09-03T20:22:05Z published: 2026-09-03T20:22:05Z canonical: "doc360.rationalacoustics.com/boundary-effects" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Boundary Effects ## Acoustically Small Sound Sources If a sound source’s dimensions are small compared with the wavelengths it produces, then it is considered acoustically small. Away from boundaries, acoustically small sources tend to be omnidirectional. A single-driver 1 m cube subwoofer would be a good example of an acoustically small sound source, as its size would be less than a quarter of the wavelength at low bass frequencies. 80 Hz, for instance, would have a wavelength just over 14 ft (~4 m). The effective directivity of an acoustically small source tends to be governed by local boundaries. The illustration below shows a large room with some identical, acoustically small sources in various positions with respect to the room boundaries. (Ignore Victor. He’s only there to avoid 3-D ambiguity.) ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/Screenshot 2026-06-10 at 10-23-35.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A02Z&se=2026-11-18T18%3A30%3A02Z&sr=b&sp=r&sig=nQeiYClHDS45kxL9YM4P8TP1Z2lE8kC45%2FNFYQ1TJtQ%3D) - The source that is dangling in free space has a Directivity Factor (Q) of 1 and radiates its acoustic power spherically – into full space. - The mid-floor source (Q=2) has its acoustic power concentrated into a hemisphere shape. It radiates the same power, but concentrated into half-space. - The baseboard source (Q=4) has its acoustic power concentrated into a quarter-sphere. It also radiates the same power but, this time, concentrated into quarter-space. - Finally, the rear corner source (Q=8) has its acoustic power concentrated into an eighth-sphere. Like the previous three examples, it is radiating the same power but, this time, concentrated into eighth-space. Useful on-axis free field sound pressure level/headroom increases, with respect to Q=1, will approach 6dB per boundary: - +6dB for Q=2 (half space) - +12dB for Q=4 (quarter space) - +18dB for Q=8 (eighth space) ## Microphones Near Boundaries Similar SPL increases apply to microphones if they are placed acoustically close to a surface –i.e., much less than 1/6th of the shortest wavelength of interest. At 1/6th wavelength, the “round trip” will be 1/3rd wavelength, causing a 120° Phase shift and resulting in unity gain summation. Larger spacing would cause either partial or full cancellation (and combing). Placing a microphone capsule on the center of a large surface can be useful when measuring, for instance, PA systems in an empty room devoid of seats, as the reflective qualities of the floor will only be visible as a 6dB increase in overall level. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/Screenshot 2026-06-10 at 10-39-42.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A02Z&se=2026-11-18T18%3A30%3A02Z&sr=b&sp=r&sig=UQh21TYhqx3%2FUVIYGqffKzRKqMM6DYNM%2FsbAYU6OOaI%3D) Placement of the microphone in relationship to the floor is critical in this type of measurement, as the reflection from the floor still causes a comb filter. The objective of this exercise is make the path of the first reflection so short (relative to the path of direct sound) as to push the first null in the resulting comb filter well above the audible Spectrum. If the path of the floor bounce is more than a few millimeters longer than the path of direct sound, the first null of the resulting comb filter will be low enough to produce at least a visible lowpass filter function in the top octave, if not an actual null within the audible spectrum. ![](https://cdn.document360.io/a725c8f7-3a1a-4c09-9518-5d15d09a2ae2/Images/Documentation/Screenshot 2026-06-10 at 10-40-25.png?sv=2026-02-06&spr=https&st=2026-11-18T17%3A30%3A02Z&se=2026-11-18T18%3A30%3A02Z&sr=b&sp=r&sig=STjG6PEGARmOUpHCH5CsACEo0hLWEA17kmRM%2FNemjSM%3D) The chart above shows comb filter functions for 9, 18, and 36 μs reflections respectively, which equate to reflected path lengths approximately 1/8, 1/4, and 1/2 in (3, 6, and 12 mm) longer than the path of direct sound. A common strategy for minimizing this issue is to rest the barrel of the microphone on a coil of cable so that the capsule is in contact with the floor (or very nearly so). It may also be preferable to use a small diaphragm microphone to further limit the maximum possible length of the floor bounce path. Phase, or Phase shift is a timing difference in a signal (relative to some reference) at one or more frequencies, typically expressed in degrees, where 360° = one full cycle at a given frequency. The frequency content of a given signal.