--- title: "Applicable Standards and Further Reading" slug: "applicable-standards-and-further-reading" updated: 2026-06-15T18:54:03Z published: 2026-06-15T18:54:03Z canonical: "doc360.rationalacoustics.com/applicable-standards-and-further-reading" --- > ## Documentation Index > Fetch the complete documentation index at: https://doc360.rationalacoustics.com/llms.txt > Use this file to discover all available pages before exploring further. # Applicable Standards and Further Reading ## Further Reading on Audio Engineering and Acoustics Ballou, Glenn. ed. [*Handbook for Sound Engineers*](https://www.amazon.com/Handbook-Sound-Engineers-Glen-Ballou/dp/0240809696). Focal Press. Beranek, Leo J. [*Music, Acoustics and Architecture*](https://www.amazon.com/gp/product/0882758519/ref=x_gr_bb_amazon?ie=UTF8&tag=x_gr_bb_amazon-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0882758519&SubscriptionId=1MGPYB6YW3HWK55XCGG2). Wiley. Berg, Richard E. & Stork, David G. [*The Physics of Sound*](https://www.amazon.com/Physics-Sound-3rd-Richard-Berg/dp/0131457896). Prentice Hall. Borden, G. J. & Harris, K. S. [*Speech Science Primer: Physiology, Acoustics and Perception of Speech*](https://www.amazon.com/Speech-Science-Primer-Physiology-Perception/dp/078172953X)*.* Williams and Wilkins. Boyce, Teddy. [*Introduction ot Live Sound Enforcement: The Science, the Art, and the Practice*](https://www.amazon.com/Introduction-Live-Sound-Reinforcement-Practice/dp/1525565095)*.* Friesen Press. Davis, D., Patronis, E., & Brown, P. [*Sound System Engineering 4e*](https://www.taylorfrancis.com/books/edit/10.4324/9780240818474/sound-system-engineering-4e-davis-eugene-patronis-pat-brown). Taylor and Francis. Davis, Gary. & Jones, Ralph. [*Sound Reinforcement Handbook*](https://www.amazon.com/Sound-Reinforcement-Handbook-Gary-Davis/dp/0881889008/ref=pd_lpo_d_sccl_1/135-2843238-4886255?pd_rd_w=CZdUk&content-id=amzn1.sym.4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_p=4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_r=YP1E992HAA1J6SDPJVNS&pd_rd_wg=lABAy&pd_rd_r=f4e9f5b7-48cc-4b26-9ebf-c5765b54386c&pd_rd_i=0881889008&psc=1)*.* Hal Leonard. Jones, D.S. [*Acoustics and Electromagnetic Waves*](https://www.abebooks.com/9780198533801/Acoustic-Electromagnetic-Waves-Jones-0198533802/plp). Clarendon Press. Huntington, John. [*Introduction to Show Control*](https://www.rationalacoustics.com/products/introduction-to-show-networking)*.* Zircon Designs Press.** Huntington, John. [*Introduction to Show Networking*](https://www.rationalacoustics.com/products/introduction-to-show-networking)*.* Zircon Designs Press.** Kleppe, J.A. [*Engineering Applications of Acoustics*](https://www.amazon.com/Engineering-Applications-Acoustics-Artech-Library/dp/0890062609). Artech House. McCarthy, Bob. [*Sound Systems: Design and Optimization: Modern Techniques and Tools for Sound System Design and Alignment*](https://bobmccarthy.com/author/bobmccarthy/). Focal Press. Olson, Harry F. [*Modern Sound Reproduction*](https://www.abebooks.com/Modern-Sound-Reproduction-Olson-Harry-F/31946587576/bd)*.* Van Nostrand Reinhold. Rigden, John. [*Physics and the Sound of Music*](https://www.wiley.com/en-br/shop/general-physics/physics-and-the-sound-of-music-2nd-edition-p-9780471874126)*.* Wiley. Rossi, Mario. [*Acoustics and Electro-acoustics*](https://www.abebooks.com/9780890062555/Acoustics-Electroacoustics-Artech-House-Library-0890062552/plp)*.* Artech House. Toole, Floyd. [*Sound Reproduction, Loudspeakers and Rooms*](https://www.amazon.com/Sound-Reproduction-Psychoacoustics-Loudspeakers-Engineering/dp/0240520092). Focal Press. **Available in the [Rational Acoustics online store](https://www.rationalacoustics.com/collections/books). ## Applicable Standards for IR Measurements and Speech Intelligibility Several of the techniques, procedures and quantities discussed in our user guide are the subject of ISO and IEC standards. We highly recommend actually reading those standards, rather than relying on our interpretations and synopses. ISO 3382, Acoustics — Measurement of room acoustic parameters, parts 1 and 2, provide a lot of additional information and recommended practices in for measurement and analysis of Reverberation Time and other objective metrics commonly used for evaluating room acoustics. • [Part 1: Performance Spaces, (ISO 3382-1)](https://www.iso.org/standard/40979.html) is geared more toward concert halls, opera houses and theaters, and contains a quite a bit of information on acoustical quantities other than reverberation times not found in… • [Part 2: Reverberation time in ordinary rooms (ISO 3382-2)](https://www.iso.org/standard/36201.html) We note that there is quite a bit of overlap between the two. In fact, the rationale for making it a two-part standard doesn’t seem immediately obvious to us, but if you didn’t want to buy both parts, part one is the more comprehensive of the two. Both parts contain much more information with regard to measurement procedures and statement of results than we have presented here. For anyone interest in getting into the nuts and bolts of techniques used for indirect IR measurement, [ISO 18233, Acoustics — Application of new measurement methods in building and room acoustics](https://www.iso.org/standard/40408.html) is a good place to start. If you are interested in making speech intelligibility measurements using STI or STIPA, IEC [60268-16, Sound system equipment – Part 16: Objective rating of speech intelligibility by speech transmission index](https://webstore.iec.ch/en/publication/26771) is really a must-read. In acoustics, the amount of time required for audio energy introduced into a system (typically a room) to diminish, or decay by 60 decibels following the cessation of a stimulus signal used to excite the system — e.g., a balloon pop, gun shot or terminated pink noise. It is normally stated band-by-band for individual octave bands. By convention, decay times are normalized to the time required for 60 dB of decay at an observed rate of decay, regardless of the amplitude range actually measured. 60 dB decay time is often referred to as “RT60” or “T60", which is sometimes a source of confusion. And just to confuse things a little more ISO 3382 specifies that it should be called T20 or T30, where the “20" and “30” refer to the decay range actually measured. The main thing to remember is that all of the above refer to 60 dB decay time within a stated frequency range. When a single-number reverberation time is given, according to the ISO standard it should be the average of the reverberation (STI for public address systems) is a less rigorous variant of STI (see above) intended specifically for use in measuring public address systems. STIPA has been validated only for male speech. The only functional difference in how STI and STIPA are measured is that instead of evaluating 13 modulation frequencies in each octave band, STIPA uses only two frequencies per band to cut down the time required for direct measurement of the modulation transfer functions (MTF). Since Smaart calculates the MTF of a system indirectly from its impulse response and all 13 modulation frequencies required for STI are also used for STIPA (just not in every band) there is no particular advantage to using STIPA in Smaart